How to set up the Jobe Infinity Island
How to set up the Jobe Infinity Island
Our Infinity Island is modular so you can extend your yacht until infinity. Create a unique playground for the family: ideal for sunbathing, doing yoga, playing around, or docking your jet ski or stand-up paddleboard..jpg)
Here you can find step-by-step how to set up the Jobe Infinity Island:
- Unroll the Island on the platform of your boat.
- Place the corner of the Island where the valve is located on the platform of your boat.
- Connect the rope to the D-rings next to the valve, so you can attach the Island with the two corners to the boat.
- Open the valve
- Inflate the Infinity Island with the battery-powered pump to the recommended pressure of 6 psi.
- When the Island is fully inflated, the pump will automatically shut off.
- Disconnect the pump and close the valve.
- Place the Infinity Island in the water. The small rings should be closest to the platform of your boat.
- Inflate the Transom Bumpers and strap them down tightly next to the platform of your boat. Always use two Transom Bumpers to be safe!
- Open the lock mount and mount the ladder.
- Close the lock mount and it’s secured.
- Place the straps onto the ladder. Adjust the straps if needed.
Now you are ready to have fun on the water!
